Description
Scaffold plank roll forming machine can make scaffold plank. We adopt servo feeder to make sure the holes are in high precision. We use punching press to make line speed faster and we use hydraulic post cutting to make sure the profile perfect.
The thickness of raw material is around 1-2mm.
Application
Technical Specifications
|
Scaffold plank Roll Forming Machine |
|||
|
No. |
Item |
Specification |
Optional |
|
1 |
Suitable material |
Type:Galvanized Coil, PPGI, Carbon steel Coil |
|
|
|
|
Thickness(mm):1-2 |
|
|
|
|
Yield strength: 250 - 550MPa |
|
|
|
|
Tensil stress( Mpa):G350Mpa-G550Mpa |
|
|
2 |
Nominal forming speed(m/min) |
10-25 |
Or according to your requirement |
|
3 |
Forming station |
20 |
|
|
4 |
Decoiler |
Manual decoiler |
Hydraulic decoiler or double head decoiler |
|
5 |
Main machine motor |
Sino-German Brand |
Siemens |
|
6 |
PLC brand |
Panasonic |
Siemens |
|
7 |
Inverter brand |
Yaskawa |
|
|
8 |
Driving system |
Chain drive |
Gearbox drive |
|
9 |
Rollers’ materail |
Steel #45 |
GCr15 |
|
10 |
Station structure |
Torri stand structure |
Forged Iron station Or Wall panel station |
|
11 |
Punching system |
No |
Hydraulic punching station or Punching press |
|
12 |
Cutting system |
Post-cutting |
Pre-cutting |
|
13 |
Power supply requirement |
380V 60Hz |
Or according to your requirement |
|
14 |
Machine color |
Industrial blue |
Or according to your requirement |
Flaw Chart
Manual decoiler--feeding--hydraulic punching station--forming machine--hydraulic cutting--out table
1. Decoiler
2. Feeding
3.Punching
4. Roll forming stands
5. Driving system
6. Cutting system
Others
Out table
