Description
The Stud and Track Roll Forming Machine, as known as Hat Shape Roll Forming Machine, Main Channel Roll Forming Machine, Omega Furring Channel Roll Forming Machine, Wall angle Roll Forming Machine, Ceiling Roll Forming Machine Light Steel Keel Roll Forming Machine etc. can produce studs, tracks and many other shapes derived form Shape C.
The thickness is normally can be formed at 0.25-1.2mm .
If you need to more efficiency then we recommend you adpot the Flying shear with No-stop system .
The Max. whole line speed can be reach at 40m/min.
If you want to produce more than one profile in one machine, we recomend you the double rows forming machine and triple rows forming machine to save space and economy.
Technical Specifications
|
Stud, Track and Channel Roll Forming Machine |
|||
|
No. |
Item |
Specification |
Optional |
|
1 |
Suitable material |
Type:Galvanized Coil, PPGI, Carbon steel Coil | |
| Thickness(mm):0.25-1.2 | |||
| Yield strength: 250 - 550MPa | |||
| Tensil stress( Mpa):G350Mpa-G550Mpa | |||
|
2 |
Nominal forming speed(m/min) |
10-40 | Or according to your requirement |
|
3 |
Forming station |
8-14 | |
|
4 |
Decoiler |
Manual decoiler | Hydraulic decoiler or double head decoiler |
|
5 |
Main machine motor |
Sino-German Brand | Siemens |
|
6 |
PLC brand |
Panasonic | Siemens |
|
7 |
Inverter brand |
Yaskawa | |
|
8 |
Driving system |
Chain drive | Gearbox drive |
|
9 |
Rollers’ materail |
Steel #45 | GCr15 |
|
10 |
Station structure |
Wall panel station | Forged Iron stationOr torri stand structure |
|
11 |
Punching system |
No | Hydraulic punching station or Punching press |
|
12 |
Cutting system |
Post-cutting | Pre-cutting |
|
13 |
Power supply requirement |
380V 60Hz | Or according to your requirement |
|
14 |
Machine color |
Industrial blue | Or according to your requirement |
Flow Chart
1. Decoiler
2. Feeding
3.Punching
4. Roll forming stands
5. Driving system
6. Cutting system
Others
Out table
