Mochini o entsoeng ka tšepe o entsoeng ka galvanized CZ Purlin

Tlhaloso e Khutšoanyane:


  • Bongata ba Odara:1 mochini
  • Boema-kepe:Shanghai
  • Melao ea Tefo:L/C, T/T
  • Nako ea tiisetso:lilemo tse 2
  • Lintlha tsa Sehlahisoa

    Phetoho ea boikhethelo

    Li-tag tsa Sehlahisoa

    Tlhaloso

    Mochini oa ho etsa moqolo oa Purlinke eona e tsebahalang haholo ebile e na le ts'ebeliso e pharalletseng hoMekhoa ea Kaho ea Metal, Litharollo tse kholo tsa marulelo, KaholeMerero ea Nchafatsoetc. Tsa ronaMochini oa ho etsa moqolo oa Purlinka hlahisaC purlin, U purlin, Z purlin, mefuta ea boholo bo ka sebelisoang ka mokhoa o latelang: Bophara: 0-300mm, Bophahamo: 50-100mm, Botenya: 1.5-3mm. Lintho tse tala e ka ba: tšepe e kentsoeng ka serame, tšepe ea Galvanized, PPGI, tšepe e phahameng. Li-purlins tse felileng lia kopanaJIS G standard, ASTM International Standard, AS/NZS International Standardsjoalo-joalo. Ke mochini o motle ka ho fetisisa oa purlin bakeng sa morero oa hau.

    Ho ea ka boemo ba karolo ea hau, boholo ba boholo, mefuta ea botenya re ka u fa litharollo tse fapaneng tsamochini oa ho etsa moqolo oa purlinho etsa mefuta e mengata ea li-purlins tsa meralo (bolelele le bophara ba phetoho e sebelisa mochini o ikemetseng ka li-motors):
    Feela ho hlahisa karolo ea C/U, fetola nako: metsotsoana e seng mekae
    Buka ea C/U/Z e fetola mola o felletseng ho tloha ho C ho ea ho Z, fetola nako: metsotso e 10
    C/U/Z/M karolo-manual fetola liteishene tse 4 ho tloha ho C ho ea ho Z, fetola nako: metsotso e 2
    Karolo ea C/U/Z/M-fetola ka tsela e iketsang ho tloha ho C ho ea ho Z, fetola nako: metsotsoana e seng mekae
    Mabapi le yuniti ea ho itšeha, o ka khetha sehiloeng pele, sehiloeng ka poso kapa ka bobeli. Sistimi ea ho khanna ea Gearbox e nang le litepisi tsa tšepe ea tšepe e tšoarella ho feta ebile ea khothaletsoa.
    Haeba u hloka feela ho hlahisa boholo bo fokolang, re boetse re fana ka maikutlo a ho fetola matsoho, ho theko e tlaase.

    Re etsa litharollo tse fapaneng ho latela setšoantšo sa bareki, mamello le tekanyetso, re fana ka ts'ebeletso ea motho a le mong, e ikamahanyang le litlhoko tsohle tsa hau. Ho sa tsotellehe hore na u khetha mohala ofe, boleng ba Mechini ea Linbay bo tla etsa bonnete ba hore u fumana lifaele tse sebetsang hantle.

    Kopo

    C purlin U purlin Z purlin (2) Z purlin (1)

    Taba ea 'Nete A

    mochine oa ho etsa moqolo oa purlin

    Tlhaloso:

    SenaMochini oa ho etsa moqolo oa C/Z/U/M oa purlinke tlhahiso ea rona e ncha ka 2018. Mochine ona o rometsoe ka ntle ho Mumbai, India. Mochine ona o motle o ka etsoaC karolo, U karolo, M karolo le Z karolo purlinska botenya 1.5-4mm. Mohala oa purlin o na le servo feeder, leveler le othomathike ea phetoho ea bophara le bophahamo, hape ho tloha ho C ho ea ho Z o hloka feela ho fetola liteishene tse 4 ka letsoho ka lebili la phetoho. E ka sebetsoa mohala o felletseng le opareitara e le 'ngoe habonolo ka metsotso e 2. Linbay Machinery ke khetho ea hau e ntle ka ho fetisisa bakeng sapurlin moqolo ho etsa tharollo.

     

    Taba ea 'Nete B

    case b ea purlin roll forming machine

     

    Tlhaloso:

    SenaMochini oa CZ purlin o fetohang o fetohang kapeleke mohala o holileng oa tlhahiso. Re na le boiphihlelo ba lilemo tse 10 mochining ona. E theko e tlase ho feta, ke moruo ebile ke morekisi oa rona o moholo ka ho fetisisa. E amohela sistimi e sehiloeng pele ho qoba ho fetola li-blades tse ngata haholo, e leng ho bolokang nako bakeng sa hau. Boholo bo ka fetoloa ka enjene ka bo eona. Ho fetola nako ho tloha ho C ho ea ho Z ho hloka metsotso e 10. Linbay Machinery ke khetho ea hau e ntle ka ho fetisisa bakeng sa tharollo ea ho etsa purlin roll.

    Mohala o felletseng oa tlhahiso ea mochini oa ho etsa moqolo oa Purlin

    mochini o felletseng oa tlhahiso ea mochini o etsang li-purlin roll

    Litlhaloso tsa Tekheniki

    Mochini oa ho Etsa Moputso oa Purlin
    Lisebelisoa tse ka etsoang : A) Koele e entsoeng ka Galvanized Botenya(MM): 1.5-3
    B) PPGI
    C) Coil ea tšepe ea carbon
    Matla a tlhahiso : 250 - 550 Mpa
    Tensil stress : G350 Mpa-G550 Mpa
    Decoiler: Manual decoiler * Hydraulic decoiler (ho ikhethela)
    Sistimi ea ho phunya: Seteishene sa hydraulic punching * Tobetsa ea ho phunya (ka boikhethelo)
    Seteishene sa ho theha : 18-20 liteishene
    Mofuta oa mochini o ka sehloohong: Shanghai Dedong (Letšoao la Sino-Jeremane) * Siemens (Ka boikhethelo)
    Sistimi ea ho khanna: Ho khanna ketane * Gearbox drive (ka boikhethelo)
    Sebopeho sa mochini: Seteishene sa phanele ea lebota * Seteishene sa tšepe se entsoeng ka tšepe (ho ikhethela)
    Lebelo la ho etsa : 10-20 (M/MIN) * Kapa ho latela lits'oants'o tsa profil ea hau
    Lisebelisoa tsa Rollers: Tšepe #45 * GCr 15(Ho ikhethela)
    Sistimi ea ho khaola: Ho khaola pele * Ho itšeha ka morao ho bokahohle (ho ikhethela)
    Letšoao la ho fetola khafetsa : Yaskawa * Siemens (Ka boikhethelo)
    Letšoao la PLC: Panasonic * Siemens (Ka boikhethelo)
    Phepelo ea motlakase : 380V 50Hz * Kapa ho ea ka tlhokahalo ea hau
    Mmala oa mochini : Boputsoa ba indasteri * Kapa ho ea ka tlhokahalo ea hau

    Tšebeletso ea ho reka

    tšebeletso ea ho reka

    Q&A

    1. P: U na le boiphihlelo ba mofuta ofe ho hlahisengmochini oa ho etsa moqolo oa purlin?

    A: Re rekisitse kantleMochini oa ho etsa moqolo oa C/Z purlinho ea India, Serbia, UK, Peru, Argentina, Chile, Hondulas, Bolivia, Egypt, Poland, Russia, Spain, Romania joalo-joalo Ke mochini o tsebahalang haholo oa ho etsa moqolo ho feta tsohle.

    Liindastering tsa Kaho, re khona ho etsa mechini e mengata joalo kaMochini o ka sehloohong oa ho etsa mochini oa mochini, mochini o etsang mochini oa mochini o etsang roll roll, mochini o etsang roll roll, mochini o etsang roll roll, mochini o etsang mochini o bobebe oa gauge, mochini o etsang mochini o omisitsoeng, mochini o etsang li-stud roll, mochini o etsang pina, mokato oa tšepe ) mochini o etsang roll, vigacero roll, mochini o etsang marulelo / lebota, mochini o etsang lithaele tsa marulelo.etc.

    Ke mochini o motle ka ho fetisisa oa tšepe bakeng sa projeke ea hau.

     

    2. P: Ke boholo bo bokae bo ka hlahisang mochine ona?

    A: Mochine ona o ka hlahisa C purlin, Z purlin, U purlin, Sigma purlin, 'me karolo e' ngoe le e 'ngoe e ka hlahisa boholo bo bongata, bophara ba bophara ke 80-300mm, bolelele ba bolelele ke 50-100mm, botenya bo khothalletsoang ke 1.5-3mm. Ke khetho ea hau e ntle ka ho fetisisa le e theko e tlaase bakeng sa foreimi ea tšepe.

     

    3. P: Nako ea ho fana ka mochine oa tray ea cable ke eng?

    A: Matsatsi a 60 ho isa matsatsing a 70 a itšetlehile ka setšoantšo sa hau.

     

    4. P: Lebelo la mochini oa hau ke eng?

    A: Ka tloaelo ho etsa lebelo ke ho pota 20m/min (fetolehang) le fofang itšeha bakeng sa botenya 1.5mm. Bakeng sa 3mm, lebelo la ho etsa le tlase, ho pota 15m / min.

     

    5. P: U ka laola ho nepahala le boleng ba mochini oa hau joang?

    A: Lekunutu la rona la ho hlahisa ho nepahala ho joalo ke hore fektheri ea rona e na le mohala oa eona oa tlhahiso, ho tloha ho ho phunya hlobo ho ea ho li-roller, karolo e 'ngoe le e' ngoe ea mochine e phethoa ka boikemelo ke fektheri ea rona. Re laola ka tieo ho nepahala mohatong o mong le o mong ho tloha ho moralo, ho sebetsa, ho bokana ho isa taolong ea boleng, re hana ho khaola likhutlo.

     

    6. P: Sistimi ea hau ea ts'ebeletso ka mor'a thekiso ke efe?

    A: Ha re tsilatsile ho u fa nako ea tiisetso ea lilemo tse peli bakeng sa mela eohle, lilemo tse hlano bakeng sa koloi: Haeba ho tla ba le mathata leha e le afe a boleng a bakoang ke lintho tseo e seng tsa batho, re tla sebetsana le uena hang-hang 'me re tla e loketse uena 7X24H. Theko e le 'ngoe, tlhokomelo ea bophelo bohle bakeng sa hau.


  • E fetileng:
  • E 'ngoe:

  • 1. Decoiler

    1dfg1

    2. Ho fepa

    2 khag1

    3.Ho phunya

    3hsgfhsg1

    4. Litomo tsa ho etsa roll

    4gfg1

    5. Mokhoa oa ho khanna

    5fgfg1

    6. Mokhoa oa ho khaola

    6fdgadfg1

    Ba bang

    tse ling1afd

    Tafole e kantle

    tsoa1

    Re romelle molaetsa oa hau:

    Ngola molaetsa wa hao mona mme o re romele wona

    LIHLAHISO TSE HLAHANG

    Re romelle molaetsa oa hau:

    Ngola molaetsa wa hao mona mme o re romele wona