Sharaxaada
Din biraha duubista mashiinka samayntawaa in la soo saaroDIN tareenkaoo loogu talagalay golaha korantada, kaas oo si weyn loogu isticmaalo rakibaadda wareegyada wareegga iyo qalabka xakamaynta warshadaha gudaha saqafka qalabka. Qalabka la mashiin karo inta badan waa birta Zinc-plated, Aluminium, steel steel iwm oo leh dhumucdiisuna tahay 1 - 1.5mm.
CaadiyanDin biraha duubista mashiinka samayntasoo saar hal cabbir, laakiin kiiskeena Argentine waxaan bixinaa amashiinka samaynta duudduuban isku xigta double, waxay noqon kartaa mid dhaqaale iyo tartan badan markaad u baahato soo saar laba ama in ka badan, sidoo kale waxaan samayn karnaa saddex-gees haddii aad leedahay hal cabbir oo dheeraad ah. Xawaaraha shaqada khadka wuxuu gaari karaa 30m/daqiiqo.
Mashiinkeenu wuxuu soo saari karaa tareenada DIN oo la kulma heerar kala duwan iyo taxane dalal kala duwan:
⚫ IEC / EN 60715 - 35×7.5
⚫ IEC / EN 60715 - 35×15
EN 50022 gudaha Yurub
⚫ BS 5585 ama BS 5584 gudaha Ingiriiska
⚫ DIN 46277 oo Jarmal ah
⚫ AS 2756.1997 gudaha Australia
Taxanaha USA: TS35, TS15
⚫ Taxanaha Argentina: NS35
⚫ Qaybta C taxanaha: C20, C30, C40, C50
Taxanaha qaybta G: EN 50035 G32
Linbay waxay samaysaa xalal kala duwan iyadoo loo eegayo sawirka macaamiisha, dulqaadka iyo miisaaniyada, iyadoo bixisa adeeg xirfadeed mid-ka-mid ah, oo la qabsan kara baahi kasta. Khad kasta oo aad doorato, tayada Mashiinnada Linbay waxay hubin doontaa inaad hesho muuqaallo si dhammaystiran u shaqaynaya.
Codsiga
3D-Sawir
Kiis Dhab ah A
Sharaxaad:
TaniDIN tareen duub mashiinka samayntawuxuu samayn karaa 4 nooc oo NS35 Taxane Din tareenada ah, mid dhaqaale iyo tartan leh. Xaaladdan oo kale, waxaan isticmaalnaa qaab-dhismeedka isku-dhafka laba-laabka ah si aan u soo saarno 2 cabbir oo kala duwan, looma baahna in la beddelo qaybo ka mid ah mishiinka, qof kastaa wuu ku shaqeyn karaa dhib la'aan. Waxa kale oo aanu ku siin karnaa xariiq dheereeya, kaas oo xawaarahiisu gaadhi karo 30m/min.
Khadka Waxsoosaarka oo dhan ee Mashiinka Samaynta Roll Rail Roll
Tilmaamaha Farsamada
| DIN Rail Roll Mashiinka Samaynta | ||
| Shayga | Tilmaamaha | Waxqabad ikhtiyaari ah |
| Walxaha lagu farsamayn karo: | A) Birta Zinc-plated | Dhumucda (MM): 1-1.5 |
| B) Aluminium | ||
| C) Birta aan la taaban karin | ||
| Awood soo saarid: | 250 - 550 Mpa | |
| Cadaadiska Tensil: | G250 Mpa-G550 Mpa | |
| Qalabka wax lagu nadiifiyo | Qalabka wax lagu nadiifiyo ee gacanta | * Decoiler Haydarooliga (Ikhtiyaar) |
| Habka feerka: | Xarunta feerka Haydarooliga | * Saxafada feerka (Ikhtiyaar) |
| Saldhigga samaynta: | 10 taagan | * Sida ku cad sawirada profile kaaga |
| Summada mashiinka mashiinka ugu weyn: | Shanghai Dedong (Sumadda Sino-Jarmalka) | * Siemens (ikhtiyaar) |
| Habka wadista: | Silsilad wadista | * Gearbox Drive (Ikhtiyaar) |
| Qaab dhismeedka mashiinka: | Saldhigga darbiga | * Birta shub (Ikhtiyaar) |
| Xawaaraha samaynta: | 10-20 (M/MIN) | * Ama sida waafaqsan sawirada profile kaaga |
| Qalabka Rollers-ka: | Birta #45 | * GCr 15 (Ikhtiyaar) |
| Habka goynta: | Goynta ka dib | * Goynta ka hor (ikhtiyaar) |
| Summada beddelka soo noqnoqda: | Yaskawa | * Siemens (ikhtiyaar) |
| PLC sumadda: | Panasonic | * Siemens (ikhtiyaar) |
| Korontada | 380V 50Hz 3ph | * Ama iyadoo loo eegayo shuruudahaaga |
| Midabka mashiinka: | Buluugga warshadaha | * Ama iyadoo loo eegayo shuruudahaaga |
Adeegga Iibka
Q&A
1. S: Waa maxay noocyada waayo-aragnimada aad u leedahay soo saaristaDIN tareen duub mashiinka samaynta?
J: Waxaan khibrad u leenahay dhoofintayadaDin tareen duub horeilaa Ameerika, Meksiko, Ruushka iyo Filibiin iwm. Waxaan soo saarnay noocyo kala duwanMashiinnada samaynta duubka tareenka Dinkuwaas oo soo saari kara sida tareenada koofiyada sare (IEC/EN 60715, TS35), tareenada qaybta C (C20, C30, C40, C50), qaybta G (EN 50035, BS 5825, DIN46277-1).
2. S: Immisa cabbir ayaa lagu samayn karaa hal mashiin?
J: Waan soo saari karnaalaba- saf, xitaa saddex-gees ah DIN duubista mashiinka samaynta, sidaas darteed waxay soo saari kartaa laba ama ka badan cabbir.
3. S: Waa maxay wakhtiga keenistadin tareenka duubista mashiinka samaynta?
J: 30 maalmood ilaa 50 maalmood waxay ku xidhan tahay sawirkaaga.
4. S: Waa maxay xawaaraha mashiinkaagu?
J: Xawaaraha shaqayneed ee mishiinku waxa uu ku xidhan yahay sawirida feedhka khaaska ah. Caadi ahaan xawaraha samayntu waa ku dhawaad 20m/daqiiqo. Haddii aad rabto xawaare sare sida 40m / min, waxaanu ku siinaynaa xal leh nidaamka feerka wareega, kaas oo xawaaraha feerka uu yahay ilaa 50m / min.
5. S: Sideed u xakameyn kartaa saxnaanta iyo tayada mashiinkaaga?
A: Sirtayada sirta ah ee soo saarista saxda ah waa in warshadeenu leedahay khad wax soo saar u gaar ah, laga bilaabo caaryada feerka ilaa samaynta rollers, qayb kasta oo makaanik ah ayaa si madax-bannaan u dhammaystiray warshadeena. Waxaan si adag u xakameynaa saxnaanta tillaabo kasta laga bilaabo naqshadeynta, farsamaynta, isu-ururinta si loo xakameeyo tayada, waxaan diidnay inaan gooyo geesaha.
6. S: Waa maxay nidaamkaaga adeegga iibka kadib?
A: Kama labalabayn inaan ku siino 2 sano oo damaanad qaad ah oo loogu talagalay khadadka dhan, 5 sano ee matoorka: Haddii ay jiri doonaan dhibaatooyin tayo leh oo ay sababaan arrimo aan bini'aadmi ahayn, waxaanu
isla markiiba gacantaada ku qabo waxaanan kuu diyaar noqon doonaa 7X24H. Hal iibsi, daryeelka cimrigaaga oo dhan adiga.
1. Decoiler
2. Quudinta
3. Feer
4. Gawaarida samaynta duubka
5. Habka wadista baabuurta
6. Habka goynta
Kuwo kale
Miiska bannaanka
